The perks of carbon when it comes to bumpy terrain need no introduction.

The Sixpack Gravel Series Carbon Handlebar has a proprietary layup ensuring vibration dampening on the top flat section while maintaining stiffness in the drops.

Similar to our Gravel AL Handlebar, the Carbon Handlebar has 7.5 degrees of backsweep to mimic the natural position of the hands and reduce fatigue over long adventures.

The 18 degrees flared drops ensure maximum control and stability whenever the roads gets rough. Compact drops ensure rapid hand movement between hoods and drops.

The Sixpack Internal Cable Routing system is the perfect solution if you are aiming for a clean cockpit, a quiet bike and want to minimize the typical risks involved with headset cable routing. It can be mounted on any bike with Acros ZS56 ICR Headsets or Acros Angle-Headsets with an additional aftermarket compression ring (11.52.106R2-AM). The stem is available in 35 mm and 50 mm length, both having a 35 mm clamp diameter and a clamp width of 55 mm.

This ICR system differs from currently available headset cable routing solutions in a few points. The major difference is in where the cables enter the headset. Cables are routed underneath (not through!) the stem. This area is sealed off with rubber cable ports to protect the headset from dust and most importantly - water. With regular HS routing top covers, water can enter the headset, which is a major known problem of the concept. Cables are routed close to the cockpit, and can be even shorter than with regular HS cable routing solutions, which further reduces danger of them tearing off and creates little to no rattling noises.

Our ICR Stem is a classic stem, like any other combined with HS cable routing, nothing proprietary or fully integrated here. We designed split-spacers for easy height adjustment of your cockpit, even after the ICR system is mounted. Just loosen the stem, pull it up, and add or remove the split spacers easily. No need to worry about that. Changing or adjusting your handlebar is as easy as ever, too. Want to ride your favorite handlebar? No problem. Want to rotate your bar a little? Easy. You are brave and like the looks of our ICR Stem and want to run it on your regular bike? No problem either. The stem can also be combined with regular headsets with the included adapter, without the HS cable routing feature.

The stem is CNC milled from AL 7075 in Germany. All other parts of the cable routing system are made of glass-fiber reinforced PA (Polyamide) in cooperation with Acros. We know what you are thinking: Plastic?! This will break. That's a common misconception, Polyamide is an extremely functional material with many benefits. It is lightweight, and - when reinforced with glass fiber - extremely robust and durable. Of course, we tested the entire system to the bone & it easily passed all industry-required tests. The Sixpack ICR system is approved for ASTM category 5, the highest category of riding.

Performance & safety on these mountain bike flat pedals for small feet. The 1st Ride Pedals enable our mini-shredders and experienced bikers alike to set up their individual dream bike. The small MTB flatpedals were developed specifically for young riders - but are for any riders with small feet.

The pedal bodies are made of durable, yet lightweight, fiberglass-reinforced PA. The perfect solution for kids that ride uphill and like to get wild on the downhill. For maximum grip, the kids mountainbike pedals are equipped with 32 replaceable pins that can be removed to protect the shins of younger bikers. By adding washers under the pins, a compromise is made between grip performance and safety.

The pedals are equipped with removable reflectors (DIN EN ISO /CPSC-compliant) to increase visibility in road traffic, at dusk or in bad weather (Bikes are not roadworthy without the reflectors!). Sealed, deep groove ball bearings and DU bushings ensure smooth pedal rotation on the thermochemically hardened CrMo axle. Rubber lip seals prevent ingress of dust and grit.

The 1st Ride kids MTB pedals are available in a variety of colors: Black, Sky Blue, Raspberry Pink and Lime Green. You choose!

The Kamikaze PA flat pedal in a nutshell:

✓ Unparalleled price-performance ratio
✓ Lightweight (370g)
✓ Large platform for excellent grip
✓ Extremely robust
✓ Fully serviceable
✓ Made in Germany

Likely the first composite pedals to withstand the strains of the mega jumps of Darkfest unscathed - engineered and manufactured in Germany. The composite pedal body is made from a glass-fibre reinforced polyamide that gives it great resilience with a low weight. We designed it with a large footprint (105x114mm) and 18 replaceable, extra-long steel pins will give you excellent grip on your MTB. The premium Sixpack Racing chromoly axle is thermochemically hardened, corrosion-resistant and also made in Germany. Together with a precision igus® bushing and two roller steel bearings, this combination ensures super smooth operation with a long service life. All of this is protected from dirt, mud, dust and moisture with our custom radial seals for extra durability. This means more time riding and less time worrying about your pedals.

At only 370g per pair, the almost indestructible Kamikaze PA pedal is superior to nearly any standard aluminum pedal in terms of stability, weight and price, while being completely Made in Germany. With seven colors to choose from, you are sure to find a color to suit your style.

Suitable for the versatile disciplines of mountain biking: enduro, eBike, downhill, dirtjump and freeride.

The perks of carbon when it comes to bumpy terrain need no introduction.

The Sixpack Gravel Series Carbon Handlebar has a proprietary layup ensuring vibration dampening on the top flat section while maintaining stiffness in the drops.

Similar to our Gravel AL Handlebar, the Carbon Handlebar has 7.5 degrees of backsweep to mimic the natural position of the hands and reduce fatigue over long adventures.

The 18 degrees flared drops ensure maximum control and stability whenever the roads gets rough. Compact drops ensure rapid hand movement between hoods and drops.

The Sixpack Internal Cable Routing system is the perfect solution if you are aiming for a clean cockpit, a quiet bike and want to minimize the typical risks involved with headset cable routing. It can be mounted on any bike with Acros ZS56 ICR Headsets or Acros Angle-Headsets with an additional aftermarket compression ring (11.52.106R2-AM). The stem is available in 35 mm and 50 mm length, both having a 35 mm clamp diameter and a clamp width of 55 mm.

This ICR system differs from currently available headset cable routing solutions in a few points. The major difference is in where the cables enter the headset. Cables are routed underneath (not through!) the stem. This area is sealed off with rubber cable ports to protect the headset from dust and most importantly - water. With regular HS routing top covers, water can enter the headset, which is a major known problem of the concept. Cables are routed close to the cockpit, and can be even shorter than with regular HS cable routing solutions, which further reduces danger of them tearing off and creates little to no rattling noises.

Our ICR Stem is a classic stem, like any other combined with HS cable routing, nothing proprietary or fully integrated here. We designed split-spacers for easy height adjustment of your cockpit, even after the ICR system is mounted. Just loosen the stem, pull it up, and add or remove the split spacers easily. No need to worry about that. Changing or adjusting your handlebar is as easy as ever, too. Want to ride your favorite handlebar? No problem. Want to rotate your bar a little? Easy. You are brave and like the looks of our ICR Stem and want to run it on your regular bike? No problem either. The stem can also be combined with regular headsets with the included adapter, without the HS cable routing feature.

The stem is CNC milled from AL 7075 in Germany. All other parts of the cable routing system are made of glass-fiber reinforced PA (Polyamide) in cooperation with Acros. We know what you are thinking: Plastic?! This will break. That's a common misconception, Polyamide is an extremely functional material with many benefits. It is lightweight, and - when reinforced with glass fiber - extremely robust and durable. Of course, we tested the entire system to the bone & it easily passed all industry-required tests. The Sixpack ICR system is approved for ASTM category 5, the highest category of riding.

Performance & safety on these mountain bike flat pedals for small feet. The 1st Ride Pedals enable our mini-shredders and experienced bikers alike to set up their individual dream bike. The small MTB flatpedals were developed specifically for young riders - but are for any riders with small feet.

The pedal bodies are made of durable, yet lightweight, fiberglass-reinforced PA. The perfect solution for kids that ride uphill and like to get wild on the downhill. For maximum grip, the kids mountainbike pedals are equipped with 32 replaceable pins that can be removed to protect the shins of younger bikers. By adding washers under the pins, a compromise is made between grip performance and safety.

The pedals are equipped with removable reflectors (DIN EN ISO /CPSC-compliant) to increase visibility in road traffic, at dusk or in bad weather (Bikes are not roadworthy without the reflectors!). Sealed, deep groove ball bearings and DU bushings ensure smooth pedal rotation on the thermochemically hardened CrMo axle. Rubber lip seals prevent ingress of dust and grit.

The 1st Ride kids MTB pedals are available in a variety of colors: Black, Sky Blue, Raspberry Pink and Lime Green. You choose!