The ANACONDA set consists of 2 Mousse + 2 Carbonaria 35 mm carbon valves.
By mounting ANACONDA in your tubeless wheels, you are more confident that it is much more difficult to break the bead, break rubber and rims.
Furthermore, if you puncture there will be no dangerous drops in pressure which could lead to falls.

And if there are only a few kilometers left before the finish line or at home, you can reach your destination, even with a flat tyre.
You can tubeless a bit; less sealant, 20-30% less and run with slightly lower pressures, to have more grip.

Innovative triple use pump:
1. Hand pump.
2. CO2 inflator.
3. Professional pressure gauge.
“Open/close” system. Equipped with safety valve.
The New Visionair have this additional features:
A) Come with dust cap.
B) Equipped with velcro bracket to fix the pump on the frame.
C) New and safer fastener system for schrader with an alloy adapter
and head for presta and regina valves with direct insertion.

With 16 gr. 1-second CO2 cartridge:
MTB (26×195) BAR 3,5/PSI 50
Racing Bike (700×200) BAR 8,2/PSI 115

With 1-minute hand pump:
MTB (25×195) BAR 2/PSI 30
Racing Bike (700×200) BAR 3,5/PSI 50

New version with channel dedicated to foam systems inside the tubeless.
New carbon fiber screw, areodynamic with tik-fix
ergonomic unscrewing system.
Set consisting of two tubeless Presta opening CARBON valves with round and square base
Interchangeable, to be used depending on the rim on which them are to be mounted.
Plus a replacement core valve and a key.
Long 35 mm. In box.

TPU is an innovative thermoplastic material, it guarantees greater lightness, compactness, smoothness and higher puncture resistance compared to common butyl.
100% made in Italy product. Available for racing, gravel, urban, city, tracking and mtb.
Weight reduction of more than 50% compared to a normal butyl chamber.

BLOB the first TPU tube in the world with sealant, light and puncture resistent. Openable valve with cap-key supplied. MADE IN ITALY

The ANACONDA set consists of 2 Mousse + 2 Carbonaria 35 mm carbon valves.
By mounting ANACONDA in your tubeless wheels, you are more confident that it is much more difficult to break the bead, break rubber and rims.
Furthermore, if you puncture there will be no dangerous drops in pressure which could lead to falls.

And if there are only a few kilometers left before the finish line or at home, you can reach your destination, even with a flat tyre.
You can tubeless a bit; less sealant, 20-30% less and run with slightly lower pressures, to have more grip.

Innovative triple use pump:
1. Hand pump.
2. CO2 inflator.
3. Professional pressure gauge.
“Open/close” system. Equipped with safety valve.
The New Visionair have this additional features:
A) Come with dust cap.
B) Equipped with velcro bracket to fix the pump on the frame.
C) New and safer fastener system for schrader with an alloy adapter
and head for presta and regina valves with direct insertion.

With 16 gr. 1-second CO2 cartridge:
MTB (26×195) BAR 3,5/PSI 50
Racing Bike (700×200) BAR 8,2/PSI 115

With 1-minute hand pump:
MTB (25×195) BAR 2/PSI 30
Racing Bike (700×200) BAR 3,5/PSI 50

New version with channel dedicated to foam systems inside the tubeless.
New carbon fiber screw, areodynamic with tik-fix
ergonomic unscrewing system.
Set consisting of two tubeless Presta opening CARBON valves with round and square base
Interchangeable, to be used depending on the rim on which them are to be mounted.
Plus a replacement core valve and a key.
Long 35 mm. In box.