Tech 4 Evo Brakes

Building on Hope’s 30+ years of manufacturing hubs, the Pro 5 is the combination of all of our experience into a product to meet and exceed the demands of current and future bike technology.

>> Improved sealing to stop dirt ingress and to reduce drag
>> New Labyrinth seal has zero drag for incredible freewheeling performance
>> New Pawls/Springs design to increase longevity, load capacity & a reduction of drag.
>> Increased engagement from 44 to 108 with a new offset 6 pawl freehub design
>> Wire cut pawls from high strength steel for maximum strength.
>> New step down axle design for a stiffer more durable freehub
>> New hub body profile for increased stiffness without adding weight
>> Ebike Specific hub designed for the demands of ebikes
>> Fully serviceable and rebuildable with simple tools
>> Available in 24, 28, 32 and 36 hole drillings
>> Available with all modern freehub bodies
>> End spacers can be easily swapped to suit different frame and axle standards
>> 6 bolt or Centrelock disc fitting
>> Available in Black, Silver, Bronze, Red, Blue, Orange & Purple

// Dual mechanism designed for easy pedal entry, secure cleat holding and positive, consistent release
// Dual sided
// Fully CNC Machined pedal bodies
// Stainless steel clips and cleats
// Pedals supplied with two cleats options
// Large shoe/pedal contact area for maximum power transfer and stability
// Replaceable pins for increased grip on Union TC (8 pins)
// Available in black, silver, bronze, red, blue, orange and purple
// Pedals run on three cartridge bearings and a maintenance free IGUS bush for smooth long term durability
// Fully serviceable and re-buildable
// Axle is high strength Cr-Mo, heat treated and plated
// Titanium axle upgrades available
// Q-Factor – 55mm
// Pedals supplied with two cleats options; 4°or 5° of free float and 12° or 13° release angle respectively. Both cleats also allow 2mm of lateral (side to side) float.
// Large platform with option of 4 pins per side.

100% designed, tested and manufactured in Barnoldswick, UK. Our Carbon bar comes from extensive testing and feedback via riders to enhance performance.

// Recommended Use - Trail / All Mountain
// Width - 800mm
// Diameter - 31.8mm or 35mm
// Rise - 20mm
// Upsweep - 5 deg
// Backsweep - 7 deg
// Weight - 225g
//Larger diameters around the bends to significantly increase the strength of the bars profile.
// Optimised laminate that has been designed to increase strength in high stress areas and enables us to remove material from where it is not required to reduce weight.

The RX2 caliper is a compact version of our RX4+, designed specifically for drop bar bikes.
Optimized for tight rear frame clearances, especially on smaller sizes.
Features a new bleed nipple for easier, cleaner maintenance.

// DOT and Mineral oil compatible versions
// Flat Mount Standard only
// Machined in one piece for increased stiffness, reduced weight, better brake feel and increased power
// Available in Blue/Orange/Black/Purple/Red/Silver and Smoke

Building on Hope’s 30+ years of manufacturing hubs, the Pro 5 is the combination of all of our experience into a product to meet and exceed the demands of current and future bike technology.

>> Improved sealing to stop dirt ingress and to reduce drag
>> New Labyrinth seal has zero drag for incredible freewheeling performance
>> New Pawls/Springs design to increase longevity, load capacity & a reduction of drag.
>> Increased engagement from 44 to 108 with a new offset 6 pawl freehub design
>> Wire cut pawls from high strength steel for maximum strength.
>> New step down axle design for a stiffer more durable freehub
>> New hub body profile for increased stiffness without adding weight
>> Ebike Specific hub designed for the demands of ebikes
>> Fully serviceable and rebuildable with simple tools
>> Available in 24, 28, 32 and 36 hole drillings
>> Available with all modern freehub bodies
>> End spacers can be easily swapped to suit different frame and axle standards
>> 6 bolt or Centrelock disc fitting
>> Available in Black, Silver, Bronze, Red, Blue, Orange & Purple

// Dual mechanism designed for easy pedal entry, secure cleat holding and positive, consistent release
// Dual sided
// Fully CNC Machined pedal bodies
// Stainless steel clips and cleats
// Pedals supplied with two cleats options
// Large shoe/pedal contact area for maximum power transfer and stability
// Replaceable pins for increased grip on Union TC (8 pins)
// Available in black, silver, bronze, red, blue, orange and purple
// Pedals run on three cartridge bearings and a maintenance free IGUS bush for smooth long term durability
// Fully serviceable and re-buildable
// Axle is high strength Cr-Mo, heat treated and plated
// Titanium axle upgrades available
// Q-Factor – 55mm
// Pedals supplied with two cleats options; 4°or 5° of free float and 12° or 13° release angle respectively. Both cleats also allow 2mm of lateral (side to side) float.
// Large platform with option of 4 pins per side.

100% designed, tested and manufactured in Barnoldswick, UK. Our Carbon bar comes from extensive testing and feedback via riders to enhance performance.

// Recommended Use - Trail / All Mountain
// Width - 800mm
// Diameter - 31.8mm or 35mm
// Rise - 20mm
// Upsweep - 5 deg
// Backsweep - 7 deg
// Weight - 225g
//Larger diameters around the bends to significantly increase the strength of the bars profile.
// Optimised laminate that has been designed to increase strength in high stress areas and enables us to remove material from where it is not required to reduce weight.