RX2 Caliper

Building on Hope’s 30+ years of manufacturing hubs, the Pro 5 is the combination of all of our experience into a product to meet and exceed the demands of current and future bike technology.

>> Improved sealing to stop dirt ingress and to reduce drag
>> New Labyrinth seal has zero drag for incredible freewheeling performance
>> New Pawls/Springs design to increase longevity, load capacity & a reduction of drag.
>> Increased engagement from 44 to 108 with a new offset 6 pawl freehub design
>> Wire cut pawls from high strength steel for maximum strength.
>> New step down axle design for a stiffer more durable freehub
>> New hub body profile for increased stiffness without adding weight
>> Ebike Specific hub designed for the demands of ebikes
>> Fully serviceable and rebuildable with simple tools
>> Available in 24, 28, 32 and 36 hole drillings
>> Available with all modern freehub bodies
>> End spacers can be easily swapped to suit different frame and axle standards
>> 6 bolt or Centrelock disc fitting
>> Available in Black, Silver, Bronze, Red, Blue, Orange & Purple

// Dual mechanism designed for easy pedal entry, secure cleat holding and positive, consistent release
// Dual sided
// Fully CNC Machined pedal bodies
// Stainless steel clips and cleats
// Pedals supplied with two cleats options
// Large shoe/pedal contact area for maximum power transfer and stability
// Replaceable pins for increased grip on Union TC (8 pins)
// Available in black, silver, bronze, red, blue, orange and purple
// Pedals run on three cartridge bearings and a maintenance free IGUS bush for smooth long term durability
// Fully serviceable and re-buildable
// Axle is high strength Cr-Mo, heat treated and plated
// Titanium axle upgrades available
// Q-Factor – 55mm
// Pedals supplied with two cleats options; 4°or 5° of free float and 12° or 13° release angle respectively. Both cleats also allow 2mm of lateral (side to side) float.
// Large platform with option of 4 pins per side.

100% designed, tested and manufactured in Barnoldswick, UK. Our Carbon bar comes from extensive testing and feedback via riders to enhance performance.

// Recommended Use - Trail / All Mountain
// Width - 800mm
// Diameter - 31.8mm or 35mm
// Rise - 20mm
// Upsweep - 5 deg
// Backsweep - 7 deg
// Weight - 225g
//Larger diameters around the bends to significantly increase the strength of the bars profile.
// Optimised laminate that has been designed to increase strength in high stress areas and enables us to remove material from where it is not required to reduce weight.

Our Tech 4 Evo brakes have more power and modulation as well as improved ergonomics at the master cylinder. This is combined with optimised, stiffer brake calipers for a difference in power you can feel on the trail.

Building on Hope’s 30+ years of manufacturing hubs, the Pro 5 is the combination of all of our experience into a product to meet and exceed the demands of current and future bike technology.

>> Improved sealing to stop dirt ingress and to reduce drag
>> New Labyrinth seal has zero drag for incredible freewheeling performance
>> New Pawls/Springs design to increase longevity, load capacity & a reduction of drag.
>> Increased engagement from 44 to 108 with a new offset 6 pawl freehub design
>> Wire cut pawls from high strength steel for maximum strength.
>> New step down axle design for a stiffer more durable freehub
>> New hub body profile for increased stiffness without adding weight
>> Ebike Specific hub designed for the demands of ebikes
>> Fully serviceable and rebuildable with simple tools
>> Available in 24, 28, 32 and 36 hole drillings
>> Available with all modern freehub bodies
>> End spacers can be easily swapped to suit different frame and axle standards
>> 6 bolt or Centrelock disc fitting
>> Available in Black, Silver, Bronze, Red, Blue, Orange & Purple

// Dual mechanism designed for easy pedal entry, secure cleat holding and positive, consistent release
// Dual sided
// Fully CNC Machined pedal bodies
// Stainless steel clips and cleats
// Pedals supplied with two cleats options
// Large shoe/pedal contact area for maximum power transfer and stability
// Replaceable pins for increased grip on Union TC (8 pins)
// Available in black, silver, bronze, red, blue, orange and purple
// Pedals run on three cartridge bearings and a maintenance free IGUS bush for smooth long term durability
// Fully serviceable and re-buildable
// Axle is high strength Cr-Mo, heat treated and plated
// Titanium axle upgrades available
// Q-Factor – 55mm
// Pedals supplied with two cleats options; 4°or 5° of free float and 12° or 13° release angle respectively. Both cleats also allow 2mm of lateral (side to side) float.
// Large platform with option of 4 pins per side.

100% designed, tested and manufactured in Barnoldswick, UK. Our Carbon bar comes from extensive testing and feedback via riders to enhance performance.

// Recommended Use - Trail / All Mountain
// Width - 800mm
// Diameter - 31.8mm or 35mm
// Rise - 20mm
// Upsweep - 5 deg
// Backsweep - 7 deg
// Weight - 225g
//Larger diameters around the bends to significantly increase the strength of the bars profile.
// Optimised laminate that has been designed to increase strength in high stress areas and enables us to remove material from where it is not required to reduce weight.