Cage Freewheels E are sprag freewheels for installation between customer-supplied inner and outer rings. The sprags are made of hardened chrome steel and have an optimized geometry. Cages are made from plastic (PA). Nominal torques up to 278 Nm.

SGM bearings are bearings produced for each part of the bike.

100Cr 6 steel is used in standard bearings.

The most important features of our bearings are:

- possibility of selecting the most suitable radial clearance of the bearing based on customer requests.

-Various types of seal, from the lightest for performance on road bikes to the hardest for greater coverage from external contamination.

- Use of greases designed for precision industrial applications with a range of use from -50°/+150°.

-Various types of cages based on the application, both in structure and materials.

Characterized by maximum filling of balls inside the bearings.

- This design allows the bearing of the same size to handle 35% more load capacity than standard bearings. Or for the same load use a smaller size bearing.

- They are sealed with double lip LLU type watertight seals.

- Ideal for use in mountain bikes, for the bike joints and the rear stay

Optimum corrosion resistance.

- Increased Lifetime (of 100%) as compared to Standard Bearing (100Cr6) and

same lifetime as stainless-steel bearing.

-Low friction between contacting surfaces for smoother running.

- Improved Wear resistance.

- Optimum quality vs price ratio as compared to standard bearing and is twice

cheaper than stainless-steel bearing.

Cage Freewheels E are sprag freewheels for installation between customer-supplied inner and outer rings. The sprags are made of hardened chrome steel and have an optimized geometry. Cages are made from plastic (PA). Nominal torques up to 278 Nm.

SGM bearings are bearings produced for each part of the bike.

100Cr 6 steel is used in standard bearings.

The most important features of our bearings are:

- possibility of selecting the most suitable radial clearance of the bearing based on customer requests.

-Various types of seal, from the lightest for performance on road bikes to the hardest for greater coverage from external contamination.

- Use of greases designed for precision industrial applications with a range of use from -50°/+150°.

-Various types of cages based on the application, both in structure and materials.

Characterized by maximum filling of balls inside the bearings.

- This design allows the bearing of the same size to handle 35% more load capacity than standard bearings. Or for the same load use a smaller size bearing.

- They are sealed with double lip LLU type watertight seals.

- Ideal for use in mountain bikes, for the bike joints and the rear stay