THERMO SYSTEM: ADAPTIVE AND INTEGRATED

The possibility of having heated grips is now increasingly popular as the trend is to use E-bikes in even colder temperatures. The Thermo System is a fully integrated product that utilizes the electronic controller already on the bike and provides the signals for setting optimal grip temperatures.

The advantage of the Thermo project lies in the wide possibility of customization by the drive unit manufacturer. From the display, you can manage all of the information relating to the grip temperatures in a completely integrated manner. The sensor in the grips can detect the temperature of the system and adjust the electronic circuit for accurate temperature management.

The Thermo heated grip has been designed to allow the minimal energy use. During the operation the system is able to maintain the control of the temperature set by the user, adapting the power supplied. The adaptive management is based on the principle of continuous temperature regulation through the exchange of data with the control electronics. Thanking to this system, the battery consumption is absolutely negligible.

Some features:

53 Ohm

Max 87 W

36-48 V

< 1,8 A

TPE 40 Sh A

Temperature detection sensor probe

Dynamic temperature control in increments of 5 degrees Centigrade

ARI the original fork oil seals by Ariete – MTB is the best you can get. This claim is justified by the quality of the materials used, and attention to detail in their design and manufacture. ARI the original fork oil seals – perfection, from Ariete.

-- The graphite-rich compound creates a self-lubricating material which is both heat and abrasion resistant
-- In using a low-stiction material the product guarantees an outstanding smooth action
-- The fine-ground seal lips with 100% inspection ensure an enhanced performance
-- Includes a capsule of ARISIL
-- ARIMER foams included if need it
-- SAG RING included

ARI – THE ORIGINAL FORK OIL SEALS, custom-made for your fork
Ariete fork oil seals are different! The quality of their execution is matched by the unique nature of the material used: the carboxylated elastomer known as XNBR.
This compound offers unique characteristics of resistance to abrasion, to high temperatures, and to the complex lubricants with numerous additives, which are used in modern forks.
The reciprocating action of the fork tube against the seal subjects it to a notable degree of abrasion, which is complicated by the heat generated as a result of hydraulic displacement within the fork, plus the friction of the components involved. This mechanical wear and tear leads to accelerated ageing of the rubber which is also obliged to deal with the chemical action of the various additives in the lubricant.
Oil seals are normally made from a nitrile rubber, known as NBR. This is used because it is cheap, and plentiful, not because NBR is the best material for the job.
Our technical staff have accumulated 75 years of experience in the rubber industry, and have spent many years looking for a better material for the manufacture of oil seals. Although the cost of XNBR is almost twice that of NBR, the sophisticated technology used to make our oil seals enables us to put them on the market at highly competitive prices. In this way, the Ariete Customer enjoys the benefits of a very high quality product, which satisfies the most demanding requirements, at a competitive price.

ARIMER, mixed open and closed-cell polyurethane foam
The unique combination of both an open and closed cell creates the perfect formula; the open cell absorb and retain the lubrificating fluid whilst the closed cells ensure an excellent elastic return. working in tandem, the closed cells release the fluid from the open cells, improving the lubrication of the fork tube overall leaving a smoother action.

SAG RING
The term SAG refers to how much your suspension sits into it’s travel just by having your body weight on it with both feet off the ground.
SAG RING is used to indicate rider sag when setting up mountain bike suspension components and to demonstrate the amount of travel being utilized while riding.

Ariete BASALTO handlebar grip is the new lock-on grip for MTB with a pattern that enhances the technical fundamentals of a sport bike handlebar grip. Designed to offer maximum grip while riding in challenging conditions, the Basalto line of handlebar grips offer the Rider the pleasant sensation of a solid, natural bond between the ground and the handlebars. Designed by Alberto Caimi.

-Inner diam. 22 mm, outer diam. 31 mm, length 130 mm.
-Compound: medium, absorbs and neutralizes vibration
-Dynamic cushion given by a yielding central body
-Excellent shock absorber effect due to the highest quality thermoplastic elastomers
-Pattern obtained by D.R.E. (Design Rendering Engineering) laser engraving technology
-Aluminum lock-on with ED Coating (Electrophoretic Deposition) system
-M4 stainless steel screw, easy to install
-Weather resistant without cracking, and keeps its elasticity even at very low temperatures

LONG DESCRIPTION: The technical designs of this new product were inspired by the natural elements in which an off-road bike normally rides. Stones, pavements, rough terrain, but even more so the lava rocks, which with their typical primeval look provide a decidedly innovative characteristic to its design, becoming the distinctive point of these new Ariete handlebar grips.

Designed to offer the best grip while riding in challenging conditions, the handlebar grips of the Basalto line provide the Rider with the pleasant feeling of a solid and natural bond between the ground and the handlebars, a bond that translates into a perfect continuity with the outdoor space, and on which our technicians, in collaboration with Designer Alberto Caimi, have focused to define the essential construction elements.

The pattern is the result of the study of the geological lines of magmatic rocks, with the surface motif of the handlebar grips being obtained by carving into the mold with the D.R.E. Design Rendering Engineering laser engraving technology. At first glance, all the individual elements are visible in relief to show how precisely this new texture was created, hinting at the idea of tiny rock chips on rubber.Beyond just grip and aesthetics were considered, and the Basalto handlebar grips are made from a very high quality family of thermoplastic elastomers, which, thanks to their molecular structure, based on styrene block copolymers, give the product not only durability, but at also the elasticity needed to achieve that much sought-after shock absorber effect in the harshest conditions.

A handlebar grip made of these materials is extremely stable to UV, Ozone and weathering, and moreover, it retains its elasticity even at very low temperatures. Also ecologically important, it is possible to separate the rubber parts from the metal sealing ring, the Basalto handlebar grip can be properly disposed of after its use.

The feeling while riding is that of a cylindrical handlebar grip, apparently neutral in terms of stress distribution in the different areas of hand support, yet the central area has a more yield, ready to give back to the Rider the effect of a dynamic cushion acting on the forces developed by the strong pressure exerted by the hands.

The body of the Basalto handlebar grip is designed for easy assembly on the handlebar. The presence of the clamping collar makes the system fast and effective; and the clamping screw is M4, made of steel and includes a threadlock treatment, installed with a tightening torque of 3.0 N/m.The collar is made of aluminum painted with an ED Coating treatment and can be colored and customized upon the customer’s request.

The WABI Goggle, with the beauty of only the essential!
WABI, the name, refers to a principle of Japanese aesthetics representing "the graceful beauty of humble simplicity". It refers to the state of consciousness experienced in the wild, when one feels so tiny before its immensity, appreciating the essentials and catching glimpses of beauty and harmony everywhere, feeling peace all around.
It is a stylish accessory with classic plain lines, with echoes of the past giving rise to a modern product. Get it now!

WHY WABI
> compact and lightweight goggle
> classic and up-to-date style
> clear Lexan® lens with full UV protection
> 3-layer foam with CarbonX for ultra-fast sweat dissipation
> proudly designed and manufactured in Varese, Italy
> Climate Partner's Carbon Neutral Certification
> CE certification

FRAME
> Medium fitment
> NO O.T.G. use (not for prescription eyeglasses)
> Anti – UV colours

LENS
> Lexan® clear, CE lens cat.0
> No optical distortion
> Best anti-fog treatment
> Anti-scratch treatment
> UV radiations total protection

VENTILATION SYSTEM
> A.V.S. Ariete Ventilation System
> Front air intake
> Open filters

3 LAYER FACE FOAM
1st layer is technical foam with closed cells
2nd layer is super-soft technical foam with open cells
3rd layer of hypo-allergenic CARBON X in contact with the skin

ELASTIC STRAP
> Anti-slip silicone bead
> Double Buckle for quick adjustment

🌍WABI CARBON NEUTRAL PRODUCT certified by Climate Partner
Proudly we can declare WABI goggles are carbon neutral products. By measuring, reducing and offsetting the carbon emissions of WABI products, we are limiting our impact on global warming while investing in certified carbon offset projects aimed at avoiding and removing carbon from the atmosphere. Isn’t amazing?

SAFETY
The ARIETE lens will withstand a 6 mm. steel ball hitting it at 135 miles per hour! The anti-fog treatment withstands more than twice the minimum requirement of standard EN 168: 2001.16
Ariete goggles and lenses are certified according to European standards EN 1938:2010; they are provided with Anti-fog treatment, which is optional under European standard EN 1938:2010. The label on the goggles provides the transparency categories of Ariete lenses.

THERMO SYSTEM: ADAPTIVE AND INTEGRATED

The possibility of having heated grips is now increasingly popular as the trend is to use E-bikes in even colder temperatures. The Thermo System is a fully integrated product that utilizes the electronic controller already on the bike and provides the signals for setting optimal grip temperatures.

The advantage of the Thermo project lies in the wide possibility of customization by the drive unit manufacturer. From the display, you can manage all of the information relating to the grip temperatures in a completely integrated manner. The sensor in the grips can detect the temperature of the system and adjust the electronic circuit for accurate temperature management.

The Thermo heated grip has been designed to allow the minimal energy use. During the operation the system is able to maintain the control of the temperature set by the user, adapting the power supplied. The adaptive management is based on the principle of continuous temperature regulation through the exchange of data with the control electronics. Thanking to this system, the battery consumption is absolutely negligible.

Some features:

53 Ohm

Max 87 W

36-48 V

< 1,8 A

TPE 40 Sh A

Temperature detection sensor probe

Dynamic temperature control in increments of 5 degrees Centigrade

ARI the original fork oil seals by Ariete – MTB is the best you can get. This claim is justified by the quality of the materials used, and attention to detail in their design and manufacture. ARI the original fork oil seals – perfection, from Ariete.

-- The graphite-rich compound creates a self-lubricating material which is both heat and abrasion resistant
-- In using a low-stiction material the product guarantees an outstanding smooth action
-- The fine-ground seal lips with 100% inspection ensure an enhanced performance
-- Includes a capsule of ARISIL
-- ARIMER foams included if need it
-- SAG RING included

ARI – THE ORIGINAL FORK OIL SEALS, custom-made for your fork
Ariete fork oil seals are different! The quality of their execution is matched by the unique nature of the material used: the carboxylated elastomer known as XNBR.
This compound offers unique characteristics of resistance to abrasion, to high temperatures, and to the complex lubricants with numerous additives, which are used in modern forks.
The reciprocating action of the fork tube against the seal subjects it to a notable degree of abrasion, which is complicated by the heat generated as a result of hydraulic displacement within the fork, plus the friction of the components involved. This mechanical wear and tear leads to accelerated ageing of the rubber which is also obliged to deal with the chemical action of the various additives in the lubricant.
Oil seals are normally made from a nitrile rubber, known as NBR. This is used because it is cheap, and plentiful, not because NBR is the best material for the job.
Our technical staff have accumulated 75 years of experience in the rubber industry, and have spent many years looking for a better material for the manufacture of oil seals. Although the cost of XNBR is almost twice that of NBR, the sophisticated technology used to make our oil seals enables us to put them on the market at highly competitive prices. In this way, the Ariete Customer enjoys the benefits of a very high quality product, which satisfies the most demanding requirements, at a competitive price.

ARIMER, mixed open and closed-cell polyurethane foam
The unique combination of both an open and closed cell creates the perfect formula; the open cell absorb and retain the lubrificating fluid whilst the closed cells ensure an excellent elastic return. working in tandem, the closed cells release the fluid from the open cells, improving the lubrication of the fork tube overall leaving a smoother action.

SAG RING
The term SAG refers to how much your suspension sits into it’s travel just by having your body weight on it with both feet off the ground.
SAG RING is used to indicate rider sag when setting up mountain bike suspension components and to demonstrate the amount of travel being utilized while riding.

Ariete BASALTO handlebar grip is the new lock-on grip for MTB with a pattern that enhances the technical fundamentals of a sport bike handlebar grip. Designed to offer maximum grip while riding in challenging conditions, the Basalto line of handlebar grips offer the Rider the pleasant sensation of a solid, natural bond between the ground and the handlebars. Designed by Alberto Caimi.

-Inner diam. 22 mm, outer diam. 31 mm, length 130 mm.
-Compound: medium, absorbs and neutralizes vibration
-Dynamic cushion given by a yielding central body
-Excellent shock absorber effect due to the highest quality thermoplastic elastomers
-Pattern obtained by D.R.E. (Design Rendering Engineering) laser engraving technology
-Aluminum lock-on with ED Coating (Electrophoretic Deposition) system
-M4 stainless steel screw, easy to install
-Weather resistant without cracking, and keeps its elasticity even at very low temperatures

LONG DESCRIPTION: The technical designs of this new product were inspired by the natural elements in which an off-road bike normally rides. Stones, pavements, rough terrain, but even more so the lava rocks, which with their typical primeval look provide a decidedly innovative characteristic to its design, becoming the distinctive point of these new Ariete handlebar grips.

Designed to offer the best grip while riding in challenging conditions, the handlebar grips of the Basalto line provide the Rider with the pleasant feeling of a solid and natural bond between the ground and the handlebars, a bond that translates into a perfect continuity with the outdoor space, and on which our technicians, in collaboration with Designer Alberto Caimi, have focused to define the essential construction elements.

The pattern is the result of the study of the geological lines of magmatic rocks, with the surface motif of the handlebar grips being obtained by carving into the mold with the D.R.E. Design Rendering Engineering laser engraving technology. At first glance, all the individual elements are visible in relief to show how precisely this new texture was created, hinting at the idea of tiny rock chips on rubber.Beyond just grip and aesthetics were considered, and the Basalto handlebar grips are made from a very high quality family of thermoplastic elastomers, which, thanks to their molecular structure, based on styrene block copolymers, give the product not only durability, but at also the elasticity needed to achieve that much sought-after shock absorber effect in the harshest conditions.

A handlebar grip made of these materials is extremely stable to UV, Ozone and weathering, and moreover, it retains its elasticity even at very low temperatures. Also ecologically important, it is possible to separate the rubber parts from the metal sealing ring, the Basalto handlebar grip can be properly disposed of after its use.

The feeling while riding is that of a cylindrical handlebar grip, apparently neutral in terms of stress distribution in the different areas of hand support, yet the central area has a more yield, ready to give back to the Rider the effect of a dynamic cushion acting on the forces developed by the strong pressure exerted by the hands.

The body of the Basalto handlebar grip is designed for easy assembly on the handlebar. The presence of the clamping collar makes the system fast and effective; and the clamping screw is M4, made of steel and includes a threadlock treatment, installed with a tightening torque of 3.0 N/m.The collar is made of aluminum painted with an ED Coating treatment and can be colored and customized upon the customer’s request.